Skip to content
Have Questions? Call us at 1-866-645-5544
Wood Stains by Application
Deck Stain Products
Log Home Stain Products
Hardwood Deck Stains Products
Wood Fence Stain Products
Wood Siding Stain Products
Cleaners / Strippers
Concrete / Masonry Products
Caulking and Chinking
Search By Brand
GacoDeckFill Sealant - 10 Ounce Tube
Ships free when ordered with GacoDeck 5GL
Sealing joints before topcoating with GacoDeck
Usually Ships in 1 to 2 Business Days
GacoDeckFill Sealant Tube
Gaco GacoDeckFill 10 ounce tube of sealant. Included with GacoDeck Kits but available separately for customers ordering GacoDeck coating in gallons and 5GL pails.
GacoDeckFill is a water-borne, Elastomeric acrylic filler that uses some consumer recycled content to make it more environmentally friendly, yet still durable and flexible. GacoDeckFill is able to flex with expanding and contracting joints, while still remaining strong.
This product is designed to be used between plywood joints, cracks and seams, and to waterproof the GacoDeck system from stress caused by wood expanding and contracting.
: Thick Gun-Grade viscosity paste that can be easily troweled
: Not for use as a top coat. Cover with a UV-durable coating. This product can withstand temporary exposure to UV for periods less then one week.
: Cut nozzle at an angle to the desired bead size and puncture inner seal. Start small, and cut
further down if you need a larger bead. Load cartridge into standard caulking gun.
Apply to all joints, fastener indentations, cracks and transitions from the flashings to the plywood.
Apply when temperatures are between 50-90°F
). Joint and crack size should not exceed
3/8" wide. If width is greater than 3/8", use backer rod. Smooth flush with deck surface using a
putty knife. If GacoDeckFill has shrunk or settled, reapply as needed following the listed
: Allow to dry for 6 hours before using DeckTape or coating with GacoDeck Top Coat. Allow the
surface to sufficiently dry prior to any sanding. NOTE: Longer dry times may be required for cold
temperatures, high humidity or when filler is heavily applied. GacoDeckFill is a water-based
system and requires the complete evaporation of water to achieve cure.
Designed to work with GacoDeck coating system
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item: