 |
 |
 |
|
Ultra Premium Red Label Wood Finish is formulated for all wood species. Gallon can.
Ultra Premium Red Label Wood Finishes are available in 10 transparent tones.
Red Label Wood Finish Application Tips
# SHAKE PRODUCT WELL BEFORE USING. DO NOT add thinning or blending agents.
# Apply Penofin to a clean, dry surface. Surface must be free of dirt and sawdust build-up. DO NOT APPLY IN DIRECT, HOT SUNLIGHT (when wood is hot to the touch).
# Brush on, use a stain pad, or spray on (garden or pump airless sprayers) one coat of Penofin.
# For maximum penetration, wait 30 minutes, then use a nap-free shop cloth and wipe the entire surface removing any excess product.
# Surface will be dry to the touch in three hours and ready for use in 12 hours
# When using the one-coat formula, the application is now complete.
# If using the two-coat formula, wait a minimum of three hours and apply a light second coat and again wipe any excess from the entire application area.
Caution & Warnings
# Combustible - keep this product away from heat, open flame, and sparks.
# Beware of spontaneous combustion. Make certain all rags or other materials used with Penofin are soaked in water, stored in an air-tight container, or otherwise disposed of safely.
Gallon Coverage
Smooth surfaces: 200-300 square feet. Rough surfaces: 125-175 square feet a gallon of Red Label Wood Finish.
Product Performance
Expect 3-5 years on vertical surfaces, 1-2 years on horizontal surfaces depending on use and weather exposure.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 99% ultraviolet protection via transoxide pigments.
- Added high-grade mildewcide.
- Great for decks, siding, fences, gazebos, outdoor furniture, boats, docks, or any wood structure in a harsh weather environment.
- Never any sanding or stripping required!
|
|
|
|
|
|
|
|
|
