Penofin Marine Finish 5 Gallon - 100 VOC for Southern California

Marine Oil Finish Application Tips
# SHAKE PRODUCT WELL BEFORE USING. DO NOT add thinning or blending agents.
# Apply Penofin to a clean, dry surface. Surface must be free of dirt and sawdust build-up. DO NOT APPLY IN DIRECT, HOT SUNLIGHT (when wood is hot to the touch).
# Brush on, use a stain pad, or spray on (garden or pump airless sprayers) one coat of Penofin.
# For maximum penetration, wait 30 minutes, then use a nap-free shop cloth and wipe the entire surface, removing any excess product.
# Surface will be dry to the touch in three hours and ready for use in 12 hours
# When using the one-coat formula, the application is now complete.
# If using the two-coat formula, wait a minimum of three hours and apply a light second coat and again wipe any excess from the entire application area.
# Penofin's Marine Oil Finish seals and protects the mill- bright beauty of natural wood.
# Multiple coats may be wet-sanded to build a lustrous self-filling, hand-rubbed finish giving it that hand-rubbed look mariners prefer.